DESCRIPTION
MOLEPLAST (SP – PQC 1) is a special water
Reducing plasticizer based on modified Naphthalene
condensate and organic polymers. The use of
MOLEPLAST (SP–PQC 1) is particularly recommended
for jobsites requiring very low plasticity Concrete
with homogenous and cohesive mix without Any
hint of Segregation, bleeding. Also to retain that low
workability for a long period,
ADVANTAGES
MOLEPLAST (SP – PQC 1) Produces cohesive Concrete
for jobsite application esp. meant for payment quality
concrete which needs initial moderate slump like
50±15mm at the discharge point to feed the sleep form
paver. The maximum retention period may be as long
as 120 minutes commencing from the moment the
water is added in the mix. Hence, retention period may
vary according to the distance to be covered by the
Tipper Truck. This can be simply achieved by adjusting
the dosage of MOLEPLAST (SP – PQC 1). Even with very
less cementations and Fines content, lubrication is
provided by the product To ensure smooth movement
of the paving machine. At the same time unwanted
event of edge collapse can Also be eradicated through
usage of this product.
CHARACTERISTICS
- Appearance : light yellow liquid
- Specific Gravity : 1.2 ± 0.02
- PH : >6
- Chloride Content : Nil, as per BS-5075 (Part-I)
- Compatibility : OPC, PPC.
APPLICATION
- Domains of application
- Low slump concrete
- Pavement Quality Concrete
Precaution : Not to be Stored at high temperature long periods.
Should be protected from frost. It is toxic and formulated from
chemicals which present a fire or health hazards.
METHOD OF USE
Dosaage : Optimum Dosage can only be established
after trials, taking into account the rheological
Characteristics and the required mechanical
performances. Rate as addition is generally in the
range of 0.4-1.5% by with Cementations material.
For maximum disperency throughout the mix,
MOLEPLAST (SP – PQC 1) Should be added to the mixing
water only. Should the product be added to the fresh
concrete, into the mixing truck.
It is necessary to mix at high speed, and then at low
speed (with a minimum 3 minutes at each speed).
NORMS AND REGULATIONS
MOLEPLAST (SP – PQC 1)) Conforms to IS : 9103-2007
ASTM C -494-1981( Type-G ).
Shelf Life : If stored in unopened containers at normal
ambient temperatures, a shelf-life of approximately
months Could be expected.
PACKAGING
225 Kgs Barrel & bulk in 10 KL tanker.
