ADVANTAGE
- Flow-able mix without bleeding and segregation.
- Ultra high water reduction-up to 35%
- High early strength
- Produces flow-able concrete resulting easy
placing and eliminates honeycombing
- Reduction in shrinkage cracks.
- Less permeable and hence more durable concrete
TECHNICAL DATA
Appearance …….…. …….…. light yellow liquid
Sp. Gravity………. …….…. 1.130+/-0.02 at 25°c
Chloride content……… …….…. nil
Ph Value……… .. …….….minimum 6
PRODUCT
MOLEPLAST PC-100 is the new generation
super plasticizing admixture base on modified
Polycarboxylate.
It complies as per specification IS: 9103-1999 and
ASTM-C-494-86, Type F,
MOLEplast pc-100 is especially designed for concrete
mixer, which helps in ultra high water reduction
,excellent flow characteristics, etc.
COMPOSITION
MOLEPLAST PC-100 is a light yellow liquid based on
super plasticizing admixture based on modified
polycarboxylate.
WHERE TO USE
- Precast concrete
- High Volume fly ash concrete
- High performance concrete
- Reinforced concrete
COMPATIBILITY
- MOLEPLAST PC-100 Compatible with all types of e.g.
OPC, PPc, PSC etc.
- MOLEPLAST PC-100 is compatible with all
air entraining agent that complies with
IS 9103-2003 and integral water proofing
compound that complies with IS 2645-1978. If
other admixture are to be used in concrete
containing MOLEplast pc-100, they must be
dispensed separately.
PACKING
50 , 100 , 250 Kg. in plastic barrel
DOSAGE/METHOD OF USE
- Dosage range of MOLEplast pc-100 should be 150
TO 900 ml to 50 kg bag of cement.
- Optimum dosage should be determined by doing
site trail mixes. Dosage may go above maximum
limited for high performance concrete abd shall
be determined by site trail mix.
- The correct quality of MOLEplast PC-50 should
be measured with recommended dispenser and
should be added to the concrete with remaining
30% mixing water and allow to mix it for at least
60 seconds.
- MOLEplast PC-50 should not be added in dry
mixes under any circumstance.
STORAGE
- Keep the liquid above freezing temperature.
- If the product has frozen, thaw it at room
temperature (25°c) and until complete
reconstitute in the original form.
- Store under cover, protect from direct sunlight.
- Failure to comply with recommended
storage condition might result in premature
deterioration of the products and packaging.
HANDLING PRECAUTION
MOLEPLAST PC-100 is a non-toxic and inflammable.
When in contact with the skin, it should be washed
with cold water.
