Superplasticizer for pavement quality concrete


MOLEPLAST (PC- PQC) is a special water Reducing plasticizer based on modified Polycarboxylate ether organic polymers. The use of MOLEPLAST (PC- PQC) is particularly recommended for jobsites requiring very low plasticity Concrete with homogenous and cohesive mix without Any hint of Segregation, bleeding. Also to retain that low workability for a long period,


MOLEPLAST (PC- PQC) Produces cohesive Concrete for jobsite application esp. meant for payment quality concrete which needs initial moderate slump like 50±15mm at the discharge point to feed the sleep form paver. The maximum retention period may be as long as 120 minutes commencing from the moment the water is added in the mix. Hence, retention period may vary according to the distance to be covered by the Tipper Truck. This can be simply achieved by adjusting the dosage of MOLEPLAST (PC- PQC). Even with very less cementations and Fines content, lubrication is provided by the product To ensure smooth movement of the paving machine. At the same time unwanted event of edge collapse can Also be eradicated through usage of this product.


  • Appearance : light yellow liquid
  • Specific Gravity : 1.1 ± 0.02
  • PH : >6
  • Chloride Content : Nil, as per BS-5075 (Part-I)
  • Compatibility : OPC, PPC.


  • Domains of application
  • Low slump concrete
  • Pavement Quality Concrete

Precaution : Not to be Stored at high temperature long periods. Should be protected from frost. It is toxic and formulated from chemicals which present a fire or health hazards.


Dosaage : Optimum Dosage can only be established after trials, taking into account the rheological
Characteristics and the required mechanical performances. Rate as addition is generally in the range of 0.4-1.5% by with Cementations material. For maximum disperency throughout the mix, MOLEPLAST (PC- PQC) Should be added to the mixing water only. Should the product be added to the fresh concrete, into the mixing truck.
It is necessary to mix at high speed, and then at low speed (with a minimum 3 minutes at each speed).


MOLEPLAST (PC- PQC) Conforms to IS : 9103-2007 ASTM C -494-1981( Type-G ).
Shelf Life : If stored in unopened containers at normal ambient temperatures, a shelf-life of approximately months Could be expected.


225 Kgs Barrel & bulk in 10 KL tanker.


It is mission with the aim to provide the highest level of satisfaction to our esteemed clients. From more than Five years, Molecules offer a complete range of over speciality chemicals including a range of Adhensives & Sealants,


Address:  Behind Maida Mill, Old Hansi Road, Jind (Harayana) 126102

Phone:  +91 90348-90100



Keep Connected