MOLEPLAST-SP-400 high range water reducing super
plasticizer for concrete, mortars provide very high
water reduction, complying to ASTM C-494 type-G BS
5075 part 3 IS 9103 1979.
MOLEPLAST-SP-400 is a brown liquid based on
selected Synthetic sulphonated naphthalene
To impart very high workability without the addition
of extra water or to enable large water reduction to be
made for higher early & ultimate strength.
300 ml to 900ml /50 kg Cement. Optimum dosage
should be determined by site trials
Packing 100, 250 Kg. Drums or Bulk delivery.
MOLEPLAST-SP-400 is a powerful superplasticiser
dispersing agent based on modified sulphonated
naphthalene formaldehyde condensate.
- Flowable concrete: moleplast-sp-400 greatly
produce flowing concrete with higher strength
in comparison of normal strength this flowable
concrete allows rapid placing of concrete with
little or no vibration and makes the concrete
denser for increased durability .
- High early strength: moleplast-sp-400 gives high
early strength if advantage of water reduction is
taken up to 25% significant increase in ultimate
strength improved surface finish,
- Improved water tightness no adverse shrinkage
effect specially suitable for congested & heavily
MOLEPLAST-SP-400 is added to part mixing (Gauging)
water. The dosage rate is 300 ml -900 ml/50 kgs. Cementbags. Optimum
dosage should be determined by site trials.
Should be avoided since it may produce a concrete
which may segregate and retard setting of
MOLEPLAST-SP-400is an industrial chemical,
ingestion should be avoided.
MOLEPLAST-SP-400is compatible with all
types of cement e.g. OPC, PPC, PSC etc
MOLEPLAST-SP-400is compatible with all air
entraining agent which complies with IS 9103-
2003 and integral water proofing compound
which complies with IS 2645-1978. If other
admixture are to be used in concrete containing
moleplast-sp-400 they must be dispensed