- Non-staining concrete surface
- Fast and easy-strapping
- Suitable for all types of form work/moulds
- Increases life of form work
- Reduces concrete contamination
- Gives fair-faced concrete finish
- Requires water for dilution
- Economical and easy to use
- Cost-effective for storage and transportation
MOLELEASE-XL is a concentrated emulsified
chemical mould, release oily liquid.
MOLELEASE-XL is pale amber liquid carefully blended
combination of refined emulsified mineral oil and
Chemical release agents.
MOLELEASE-XL is used for easy-stain free release Of
concrete Moulds and formwork of all types.
MOLELEASE-XL gives coverage of 18 to 20m² per Liter
when diluted with water depending on the On the
surface texture and porosity of the form Work.
50, 100, 210, ltr. Drums.
MOLELEASE-XL is a concentrated emulsified chemical
formwork / mould release agent based on mineral oils,
when mixed with water at 1:5 dilution, it produces a
thin film of stable release agent.
MOLELEASE-XL has an outstanding properties and
advantages over conventional oil. It may react with the
alkali in the concrete to form a thin water repellent
skin on the surface of the mould which enables easy
strapping from the hardened concrete.
MOLELEASE-XL may be used on metal surfaces,
particularly effective on resinous coated surfaces.
MOLELEASE-XL can be used safely with white cement.
MOLELEASE-XL is an internationally used material
and has an outstanding record of performance.
SP. Graphs-0.85 kg/liter at 27˚C
Dilution Rate-1:5 with water
METHOD OF USE
First dilute MOLELEASE-XL in the proportion of liter
to 5 liter of water using a clean container on stirring
thoroughly until evenly mixed. If the solution is not
used on the same day it should be stirred again before
use. Apply the solution to the face of the formwork by
spray brush or cloth, only one coat should be applied
(as thinly as possible) and allow to dry. If the formwork
is not used for several days then only a further coat
may be applied.
MOLELEASE-XL has a shelf life of 1 year if stored under
50˚c in unopened condition. Diluted product should be
used with in 5 days.
MOLELEASE-XL is an industrial chemicals and
inflammable. Proper care should be taken rubber
gloves and goggled should used. Skin contact should