1, 5, 10, 50, 100 Litre drum
MOLEASE–SPL is a ready to use. Shutter release agent with non-staining properties for any type of formwork.
MOLEASE–SPL is a mixing of special chemical &minerals having good release properties for any type of formwork
MOLEASE–SPL is a mixing of mineral oil and special chemical with good shutter release property without staining on concrete.
No preparation is necessary but if extensive re-use of timber mould. it is advisable to protect all new surface with MOLEASE –SPL. For used mould all excess cement must be removed together with any surface deposite of previous oil.
MOLEASE–SPL should be applied with brush sponge or mould oil sprayer. If a sprayer is used, care should be taken to choose correct size of sprayer. Apply one thin coat on entire surface thinnest coating necessary to achieve effective coverage. Excessive application may lead to surface dusting and un-economical too. Wipe or brush of any excess particles on the surface and apply one coat of MOLEASE –SPL. Before to remove MOLEASE –spl completely for recoating mould or shutter surface. Use strong industrial detergent together with stiff brushing then thoroughly rinse with water.
MOLEASE–SPL may be used on wooden or metal surfaces, particularly effective on resinous coated surfaces. MOLEASE –SPL can be used safely with white cement. MOLEASE –SPL is an internationally used material and has an outstanding record of performance.