MOLEGROUT GP2 is a grout for general purpose and MOLEGROUT GP2 for extra strength. MOLEGROUT GP2 is a ready-to-use free flow cementitious grout in powder form. Only water needs to be added. Such fluid grout will maintain its original volume during hardening.
It conforms to CRDC (Corps of Engineers’ Specification) 621.
Grouting of machine bases/foundation, column bases/ steel and precast concrete, anchor bolts, holding down bolts. Extra strength grout is used in crane and transporter rail, turbo Generator bases etc.
All surfaces should be free from dirts, dust, grease, oils, and other contaminants. Surfaces should be prewetted/ saturated with clean water for 4 to 6 hours, free surface water should be removed, before grouting with MOLEGROUT GP2.
Add MOLEGROUT GP2 powder to potable water in the ratio recommended for its consistency.
Water/25kg grout bag 4.25 L
Water/25kg grout bag 3.25 L Manual mixing is not at all recommended. Use mechanical mixer like paddle or revolving drum type. Full 5 minutes mixing to get homogeneous consistency is required. Fluid grout should be placed within 20/30 minutes. In gelled material no further addition of water is allowed and should be discarded.
Pouring head should be used for base plate grouting. For holding down bolt in 10 cm and above diameter hole or grout bed exceeding 80 mm thickness well graded clean aggregate from 5 mm to 15 mm in saturated surface dry condition may be used along with MOLEGROUT upto 25 to 30% of grout weight.
Plastic MOLEGROUT may be used for edge finish. Exposed edges after 8 hours of grouting should be kept under steel plate up to 24 hours and then normal curing with wet hessian or ponding may be carried out.
In 25 kg poly packs
Non-toxic. Non-flammable for free flow consistency, W/P : 0.16
TYPICAL COMPRESSIVE STRENGTH, KG/CM²
MOLEGROUT powder is required to fill 1L cavity. Ecofriendly.