MOLELEASE-XL is a concentrated emulsified chemical mould, release oily liquid.
MOLELEASE-XL is pale amber liquid carefully blended combination of refined emulsified mineral oil and Chemical release agents.
MOLELEASE-XL is used for easy-stain free release Of concrete Moulds and formwork of all types.
MOLELEASE-XL gives coverage of 18 to 20m² per Liter when diluted with water depending on the On the surface texture and porosity of the form Work.
50, 100, 210, ltr. Drums.
MOLELEASE-XL is a concentrated emulsified chemical formwork / mould release agent based on mineral oils, when mixed with water at 1:5 dilution, it produces a thin film of stable release agent.
MOLELEASE-XL has an outstanding properties and advantages over conventional oil. It may react with the alkali in the concrete to form a thin water repellent skin on the surface of the mould which enables easy strapping from the hardened concrete.
MOLELEASE-XL may be used on metal surfaces, particularly effective on resinous coated surfaces. MOLELEASE-XL can be used safely with white cement. MOLELEASE-XL is an internationally used material and has an outstanding record of performance.
Mixing : First dilute MOLELEASE-XL in the proportion of liter to 5 liter of water using a clean container on stirring thoroughly until evenly mixed. If the solution is not used on the same day it should be stirred again before use. Apply the solution to the face of the formwork by spray brush or cloth, only one coat should be applied (as thinly as possible) and allow to dry. If the formwork is not used for several days then only a further coat may be applied.
MOLELEASE-XL has a shelf life of 1 year if stored under 50˚c in unopened condition. Diluted product should be used with in 5 days.
MOLELEASE-XL is an industrial chemicals and inflammable. Proper care should be taken rubber gloves and goggled should used. Skin contact should be avoided.